Handleiding Curved Dj Booth

Setup

Select "DJUNES DJ BOOTH" and press enter

then press the logo "madrix, music makes the light" at the top.

Now the booth is done and ready to use

Add texts

• select the position you want the text in
• press "Madrix, music makes the light"

• press bottom left "Ticker - Scrolling Text" 

• press the box behind "text" to change the text
• After change the text, press "Madrix, Music makes the light" again

tip: capital letters are more often readable on the dj booth.

make presets respond to sound

You can activate this by pressing the "Audio" button in the bottom center so that it lights up yellow/green. You can adjust the intensity of the response with the fader above it.
 

to set the intensity of the lights:

You can change this by moving the fader above "black" up and down.

Switch between presets:

You can do this by pressing another preset. It can also be done by sliding the middle fader in the middle of the screen from left to right. You can use this to switch the preset from the left column to a preset from the right column. You can also use the "fader" button below it for this.

Is the text not clearly visible?

Then make sure that "Offset X, Y" are both set to 0. This can be found at "Ticker - Scrolling Text" (see editing text)
 

SUGGESTIons for DJ BOOTH

Quiet presets
A1, A2, A3, A4, A5, A9,A10, B35,
Medium presets
A10, A14, A15, A48
Throttle presets
A60, B53,
Text
A1, A2, A3, A4, A5, A8, A28, B1, B2, B3, B4, B5
Presets that respond to sound
A18, A32, A33, A36, A37, B33, B34, 
Firework
A6,A17, A44 B43, B48,
Colorful
A11, A,21, A,27 A31, A41, A42, B56, B58
Suggestion structure:
B51,B52,B53,B54